目前我们正在寻找过滤器供应商，要求有产品经验，有TS认证，有能力的供应商请与我们联系。

We are looking for Lock Valve Spring Retainer for our Thailand manufactory. About detail, please refer to attachment. Qualification of suppliers: 1. TS16949 prefered; 2. Rich in OE experience and export experience; 3. Good R&D ability; 4. Good English or Thai communicate skill.

我们正在寻找小塑料件（如顶棚上的小塑料件）配套供应商，适用于我们14-20座的高档的座商务车。 供应商要求： 1. TS16949是最基本的； 2. 要有大型整车厂配套经验； 3. 要有很强的设计研发能力。

我们正在寻找国内轻型柴油机EGR总成配套供应商。要求： 1. TS16949认证是基本的； 2. 有相关成功配套经验。

我们委托盖世寻找优质的散热片供应商 要求： (1)TS认证 (2)规模 员工数大于150 (3)有规范的操作流程与有规模的生产场地 (4)有给国外大公司做配套的经验 (5)产品性价比高 该项目SOP 时间：2010 年5月 ，项目周期：5 年 通过盖世审核的供应商，我们会寄出图纸及报价单

We are looking for Combination Meter for Genset.The specification as follow: Electrical Instrument cluster consisting of – 1.RPM cum Hourmeter – RPM range up to 2200 rpm. The range should have least count of 50 rpm or better. The rpm between 1450-1550 rpm to be indicated in Green color also the rpm between 1750-1850 rpm to be indicated in Green color. RPM should be in analog display of needle, the Hours should be up to 0.1 least count DIGITAL. RPM signal will come from battery charging alternator/main alternator. 2.Water Temperature gage – showing in deg. C. This should show temp up to 120 deg C. Temp above 95 deg C to be indicated in Red color. The least count is not important. But typically should show 50, 60, 70, 80, 90, 100 and 110. However, it should not show any further graduation between these numbers. 3.Oil Temperature gage – same as Water Temp gage. This is optional gage. 4.Pressure gage – Showing pressure in kg/cm2. The pressure range between 0-1 kg/cm2 in Red color. Up to 7 kg/cm2. 5.Battery Voltage – showing voltage up to 28/30 V. 6.Battery Current – showing current up to -30 to +30 Amps, least count of 5 Amps. 7.Fuel level gage – showing the fuel level as Empty to Full, with graduation for 1/10th level as least count. 8.Fault Indication for the following required – a.Oil pressure low b.Water Temp high c.Battery charging failure with excitation for battery charging alternator d.Over speeding trip e.Fuel Level at or below 10% f.Emergency Stop activated g.Additional 1-2 lamps

我们正在寻找国内轻型柴油机真空泵配套供应商。要求： 1. TS16949认证是基本的； 2. 有相关成功配套经验。

我们委托盖世寻找优质的转向阀供应商 要求： (1)TS认证 (2)规模 员工数大于150 (3)有规范的操作流程与有规模的生产场地 (4)有给国外大公司做配套的经验 (5)产品性价比高 通过盖世审核的供应商，我们会寄出图纸及报价单，也希望符合要求的供应商联系到我们

我们正在寻找国内优秀的进气格栅配套供应商，适用于我们的乘用车。 供应商要求： 1. TS16949； 2. 有给国内诸如BYD, Chery 等大型主机厂配套的经验； 3. 长江一带优先考虑。

我们委托盖世寻找优质的润滑油供应商。 要求：TS认证，配套经验，进出口经验，与Parker同档次的供应商