We are looking for Compressor cover which material is aluminum.If you are manufacturer,please feel free to contact us. Our suppliers must be manufacturer and have high quality.

是在中英合资有限公司的基础上，为适应动力产品国际化趋势要求，引入新的战略合作伙伴—国内某知名商用整车厂，扩大资产规模，提升生产能力，升级产品技术建立的现代化发动机制造企业。目前我们正在寻找输油泵供应商. 1. 配套供应商; 2. 有多年的国内或国外配套经验; 3. 必须有TS16949认证.

We are looking for hose:(一)CNG Hose with follow features (1)OD : 27± 0.5 mm (2)ID : 19 (3)MAaterial : NBR (4)Hardness: 70±5 SHORE A(5)Tensile Sterngth : MIN 10 Mpa(6)Elogation: MIN 250%(7)General Tolerance : ± 0.1(二)Water Hose with follow features:(1)OD : 13±0.5 MM(2)ID : 7 MM(3)Material : EPDM(4)Hardness: 70±5 SHORE A (5)Tensile Strength: MIN 7 Mpa(6)Elongation: MIN 200 %(7)General Tolerance : ± 0.1(三)Petrol Hose with follow features(1)OD : 13±0.5 MM(2)ID : 7 MM(3)Material:EPDM or NBR (4)Hardness:70±5 SHORE A(5)Tensile Strength: MIN 10 Mpa(6)Elongation:MIN 250 %(7)General Tolerance :± 0.1.If you are manufacturer,please feel free to contact us. (1)OE Experience (2)TS16949 Certification.

我们公司是在中英合资有限公司的基础上，为适应动力产品国际化趋势要求，引入新的战略合作伙伴—国内某知名商用整车厂，扩大资产规模，提升生产能力，升级产品技术建立的现代化发动机制造企业。目前我们正在寻找水温传感器,适用于商用车型. 1. 配套供应商; 2. 有多年的国内或国外配套经验; 3. 必须有TS16949认证.

我们公司是在中英合资有限公司的基础上，为适应动力产品国际化趋势要求，引入新的战略合作伙伴—国内某知名商用整车厂，扩大资产规模，提升生产能力，升级产品技术建立的现代化发动机制造企业.目前我们正在寻找国内实力较强的柴油机缸盖垫供应商.适用于商用车. 1. 配套供应商; 2. 有多年的国内或国外配套经验; 3. 必须有TS16949认证.

Now we are looking for Turbo pipe we need the suppliers steel standard : AP13 UNE 36093 = DD13 EN 10111 = UStW24 DIN 1614 Forecast needs : 30 000parts 1.Suppliers with Automotive experience are preferred (ISO/TS16949 certification). 2.Already have the experience of making this product. 3.Supplier from Korea or Japan is ok

Now we are looking for Metal Ring used in air filter, If you are qualified we will send you the drawings. 1.Suppliers with Automotive experience are preferred (ISO/TS16949 certification). 2.Already have the experience of making this product. 3.Supplier from Korea or Japan is ok

Transmissions housing,Low Pressure Die Casting Parts Weight (blank): ~ 49 kg 1.We only need manufacturers who have TS16949 and ISO14000. 2.The suppliers have already been supplying OEMs

Converter shell, Low Pressure Die Casting Parts Weight (blank) ~ 37 kg Dimension Ø ~560, H ~ 280 mm 1.We only need manufacturers who have TS16949 and ISO14000. 2.The suppliers have already been supplying OEMs

Low Pressure Die Casting Parts 1.Rear cover Weight ~ 10 kg (blank 11,8 kg) Dimension Ø ~415, H ~ 150 mm Yearly volume ~ 1550 to 2500 p2.cs Rear cover Weight ~ 10 kg (blank 11,8 kg) Dimension Ø ~415, H ~ 150 mm Yearly volume ~ 120 to 200 pcs 1.We only need manufacturers who have TS16949 and ISO14000. 2.The suppliers have already been supplying OEMs