Buy Fuel Pumps

• Post Date: Jun 25, 2009
• PurchaseType: Normal
• Expiry Date: Aug 25, 2009

We are looking for Fuel Pumps with the following specs. Kindly give us your best quotes. Our requirements are as follows: 1) FUEL PUMP Portable Fuel Pump Heavy duty Centrifugal fuel pump, diesel driven engine with flow rate of 500 lt/min, mounted on heavy duty two wheeled cart ( suitable for the transfer of diesel) and complete with following: a) Discharge hose 15M x 3.75cm with piston style fuel nozzle b) Meter reading device c) Suction hose 3M by 5.03cm with quick coupler and dust cap d) Filter/separator assembly to remove sediment and water, with five (5) additional replacement filters e) Static ground and bonding cable f) Spark arrestor g) Pressure relief valve and loop (bypass) and gate valve assembly that includes nipple, elbow, valve and 5.03cm male cam lock. 2) Spare parts kit for pump in line item(1) above including air filter, lube, oil filter, fuel filter, seal assembly pump, rol sealing tape, set O-ring gaskets, packing, set hose clamp high pressure ( suction and delivery). 3) Velcon filter Housing VF-61E Features: Maximum operating pressure: 150psl Material: die cast aluminium head and closure clamp assembly carbon steel shell with epoxy coated exterior and interior inlet/outlet connection: 11 by 2 inch NPT Closure seal: Buna-N O-Ring 1/8" Petcock Vent Valve and half inch drain Valve Suitable for jet A1 Aviation Fuel. 4) Filter Cartridge AC-51201L for use with VF-61E Housing Suitable for Jet A1 Aviation fuel. Maximum Operating Temperature: 200 degrees Fahrenheit, Flow rates: 5-50USGPM 5) VF-61E Differential Pressure Gauge Kit for use with the VF-61E Housing Features. Differential Pressure Gauge: Aluminium body, 1 by 8 inch NTP Bottom 1inch molded lens & 0-20 psid Scale. Compression fitting 1 straight another one 90 degrees elbow. 6) Rotary Hand Pump with counter Suitable for handling Gasoline, diesel fuel, light and other non corrosive based fluid from 200 liters drum and equipped with a flow meter/ counter to measure the quantity of fuel in liters. Pump should be equipped with handles, 1inch telescopic steel suction pipe extending to 40inch, 2inch bung adopter, Nozzle, three-quarter inch by 8inch delivery hose with static wire, filter strainer, anti siphoning valve. Pump can be set up to reverse flow and may be padlocked. Other features of the pump are as below: Construction - Aluminium Body with Cast Iron Rate of flow - 3.8Liters per 10 revolutions Maximum ambient operating temperature - 66 degrees Celsius Minimum ambient operating temperature - -26 degrees Celsius Pump must show evidence of approval/certification by a nationally or internationally recognized organization for testing of products to be ensured public safety.