Buy Clips

• Post Date: Nov 10, 2014
• PurchaseType: Normal
• Expiry Date: Nov 10, 2015

This is Taghreed from Jordan , we want price offer of plastic clips for Scheduled to wire at these specifications as soon as possible • Insulating piercing connector line insulated bimetallic { 16- 70} mm ^ 2 { tap lain : insulated bimetallic ( 1.5 – 10 mm ^ 2 )• Body and seals : shall be made of a thermo plastic and weather uv radiation proof materials, water tightness of connectors shall be ensure by appropriate elastomeric materials and shall not be totally based on use of grease gel , paste • Grease : shall be based on silicon with no dripping point .• Teeth : shall be of tinplated purlty hardened copper of brass ( aluminum teath are not accepted) the teeth shall be of high conductivity and shall allow bi- metallic connections between aluminum and copper conductors . • Shear head : there shall a metallic heud to ensure that bolt has tightened to certain torgue in order to ensure a perfect contact between the teeth of connector and the cable conductor• Bolt washer and nut : they be made of stainless steel brass or galvanized steel grade the bolts shall have security safety pins and sheer heads as per above clause to prevent the disassembly of the connector• End cap : shall be fixed and attached to the connector for protection against water• The manufactures shall submit test certificate to prove that the following tests have been successfully carried out according to the latest French standard (nfc 33- 020) at on independent European laboratory or equivalent1- Mechanical tests lnclude : shear heads and mechanical behavior of the connector ,Effect of tightening on the mechanical strength of the main core , checking mechanical strength of tap cores.2 - Check fore electrical continuity 3-Voltage and water tightness tests4-Installation test at low temperatureQTY : 10000 PCSAwaiting your sooner replying