We are in need of Double Acting Cylinder Group . • Pressing capacity. Rod in, ton:- 87-90 Rod out ton, :- 103-105 • Pressure (rod out & rod in), p.s.i:- 10,000 • Cylinder diameter, mm:-169- 165 • Overall length, mm :-470-472 • Stroke, mm:- 180-185 • Accessories:- Male & Female coupler assembly, Dust cap, Plugs, Hoses , adapters &others

We are in need of Electrical Lifting Bridge• Lifting capacity, ton :- 14 - 15 • Lifting height, mm :- 1700 - 2000 • Width b/n the column, mm:- 2300 - 2700 • Overall length mm:- 5500 - 6000 • Lifting time (laden) Sec:- 23 - 24 • Lowering time (laden ) sec:- 13-14 • Motor horse power:- 3.5 - 4 • Power source, v:- 220/380/50HZ/three phase • Safety device :- Mechanical and electrical safety device shall be equipped • Type:- It shall be used for safe servicing of small , as well as large 4WD vehicles • Accessories :- A Jacking beam that shall provide a “wheel force” for most types of under vehicles work, and all other necessary tools to be included.

We are in need of Electrical and Mechanical Driven Overhead Crane. • Maximum lifting capacity ton:-8-10 • Lifting speed m/min :-1.5 • Maximum lifting height mm:- 1000-1500 • Motor power, hp:-2-2.5 • Power source, V:-220, 380/50HZ, 3ph • With all attachments and running gears and drives

We are in need of Heavy Duty Lathe Machine. • Turn diameter gap, mm : 900 • Center diameter , mm: 900 • Power source ; 220/380v/Ac, three phase, 50Hz • Number of speed :- min18 • Spindle bore, mm:- minimum 100 • Spindle speed range rpm:-40-2000 • Thread pitch :- to be stated • Swing over bed, mm ;- Min 450 • Swing over carriage, mm:-min 280 • Distance between centers, mm:-min.2000 • Hole through spindle ;- to be stated • Spindle nose thread:- to be stated • Tool on top slide:- to be stated • Travel of cross slid, mm:- min155 • Taper of tail stalk spindle :- to be stated • Protector graduations:- to be stated • Hand wheel graduations:- to be stated • Length over all:- to be stated • Width overall :- to be stated • Motor /speed control:- to be stated • Feeds/ revolution :- to be stated • Motor capacity, hp :- min.5 • Tail stock type and size:- to be stated

We are in need of Hydraulic Power Hack Saw Machine. • Capacity of round metal, mm:- 250 - 300 • Stroke, mm:-Max.145 • Stroke per min.:-85-90 • Electric motor , Hp:-1.5 - 2 • Speed, RPM:-1440-1450 • Blade size, mm:-508 x 38 • Number of cylinder, Pc:- 1 • Capacity of square bar, mm :-200-250 • Power Source, v:- 220/380, 50hz, three phase AC • Accessories to include:- • Auto stop panel • Limit contactor • Push button switch • Cut area pre – set adjustment gauge and others

We are in need of Hose Crimping Machine. • Head Chuck o Operation:- Manual o Maximum hose diameter, mm:-76-80 o Minimum diameter of hose, mm:-6 • Chuck jaw & length o Segment :- 8 o Length, mm :- 100 • Die punch & length o Sets:- 9 o Length mm:- 60-65 • Crimp die size, inch:-1/4, 3/8, 1/2, 5/8, 3/4, 1, 1 ¼,1 ½, 2 & others • Crimping depth, seating with micrometer • Crimping force, bar:- 600 • Control panel:- Electro Hydraulic • Power Source, v :- 220/380, 50Hz, Ac, 3 – phase • Hydraulic valve, type:- solenoid controlled valve,220v • Hydraulic pump, type:-High pressure plunger pump • Hydraulic Cylinder :- Single acting • Oil tank capacity, lit. :-25 - 30

We are in need of Hand Operated Trunk Folding Machine. • Diameter of eccentric, inch :- 4 - 4.5 • Thickness machines plate used inside, inch:-1/2 • Ram cross sectional size, inch:- 6 x 1 ¼ • Blade cross sectional size, inch :-6 x 1 ½ • Bar cross sectional size, inch;-2 ½ x 2 ½ • Grier cross sectional size, inch :- 8 x 4 • Bending length, inch:- 60 - 65 Accessories:- o Bending bar o Bending plate o Round pipe o Handle o Locking cover & others

我们正在寻找TPO膜供应商，是一种材料 ，压成门板形状的一层膜，材料是TPO的放在门板里面使用，跟门板的形状差不多。 供应商要求： 有过类似给汽车配套使用经验的优先考虑。

We are in need of Light and Heavy Duty Tyre Changer. A. Light duty Tyre changing machine • Rim size 6”.00 – 14” • Maximum Wheel diam. mm :-Max1200 • Maximum wheel width, mm:- 410-500 • Bead breaking force, bar:- min10 • Motor, hydraulic power, HP:-1.5-2 • Power source, v :-220/380, 50HZ 3 phase • Over all dimension :- To be stated • All the necessary standard adaptors, • Connection and accessories shall be supplied B. Heavy duty Automatic self centering chuck Tyre Changing machine • Rim capacity:- 14”- 47” • Maximum wheel diam. mm:- 2300-2350 • Maximum wheel width, mm:-1070-3500 • Bead breaking force, kg:- 3000-3500 • Motor, hydraulic power,HP:-1.5-2 • Power source, v:- 220/380, 50HZ 3 phase • Over all dimension:- To be stated • All the necessary standard adaptors, • Connection and accessories shall be supplied

We are in need of Mobile Electric Driven High Pressure Car Washing Machine. • Capacity, lit:- min.500-550 • Operating pressure, bar:-10.0 - 15.0 • Head, meter :-40 - 45 • Motor, HP:- 3.5 - 4 • Flow rate, m3/hr:- 10 • Pump type:- double acting for high pressure washing • Hose type:- quick coupled, oil proof rubber hose • Hose size, Inside diameter, mm:- 12 Length, mm:- 7000 • Nozzle:- adjustable, jet trigger with lance handle • Power source, V:- 220/380, 50HZ, three phase • Mounting :- Shall be on a strong frame with four wheels • Tyre size:- to be stated • Frame type:- to be stated