We are looking to import a friction/automatic rollover car wash to add to existing line of X-Stream Touchless car wash we manufacture in the USA. Please be in contact kindly.

We want to import some car washingm achine to Vn or want to become representative of your company to sell it at Vietnam . Please contact with us detail all kind and price of machine in order. If interested we could have a closer meeting with you.

We are looking for volve diagnostic tool. If interested please contact us free.

One of our customer look for repair harness for auto bulbs. If you could supplie please contact us as soon as possible.

Capacity : 105-115 (4-1/8" - 4-1/2") dia. holes using 4" DTH Hammer, 73 mm x1.83m (2-7/8"x 6 ft) Starter drill pipe and 73mm x 3.05 m (2.7/8 x 10 ft) Extension drill pipe. Mounting : Crawler Feed Drive : Chain feed driven by hydraulic motor through a gear box provide adequate feed/pull up force Rotation : Hydraulic motor and spur rotation gear box provide adequate torque and speed range of 0-60 rpm. Tramming Speed : 0-1.4 Kmph Gradeability : 30% Track Oscillation : + 7.5 deg. Through two hydraulic cylinders. + 10 deg. Through two hydraulic cylinders. Power Pack : On board 300 cfm/200 psi Compressor is powered by a water - cooled Cummins diesel engine. Positioning : Boom Swing (Left / Right) : 40/45 deg. Boom Lift (Up/Down) : 45/30 deg. Guide Swing (Left / Right) : 45/45 deg. Guide Dump : 75 deg. Dimensions : Length (Guide Horizontal) : 7200 mm Height (Guide Horizontal & with canopy) : 3215 mm Width : 2870 mm Weight (Approx) : 8200 kgs Ground clearance : 478 mm Electrical system : 24 volts night lights 4x (55 watts)

Now we are looking for steel for Thin-walled welded pipe and Seamless steel pipe. (1)TS16949 is a must (2)more than 2 years' OE experience

We are in need of spare tire hoist in the attachment. We are looking for the vendor. The product with high quality and competititve price is favored. The attachment is the picture for your information.

We are looking for punches (toolings) for cold forged fasteners and nut tapping machines, multistation bolt and nut formers. Matched suppliers please contact us.

We are looking for carbide dies for cold forged fasteners and nut tapping machines, multistation bolt and nut formers. Matched suppliers please contact us.

We are looking for PC Auto diagnositic tool in China market. This equipment will be used as a scanner to check engineers status. But we need all the output data to be input into regular personal computer and shown by PC monitor.