I am from a water pump manufacturar in Argentina.We are looking to suppliers of powder metal puleys for water pumps, specially for chevrolet / peugeot / renault / volkswagen applications.Please, if you have developed these items, send us a catalogo and quotation of each one.

Looking for Powder Metallurgy Sintered Clutch Spare Parts.

We are now searching qualified powder coating factories for our metal product coating process.If your company have the experience of PE 55 powder coating (Akuzu)

Attached is preliminary drawing. Several details are missing. Specifically Helical gear and "star" drive dimensions.Can you quote based on supplied drawing and photo? If price is feasible then we can spec critical dimensions or send you the gear to copy.Rockwell C hardness must be 34C.

We are looking forward to buy Powder Metallurgy Equipment. Kinldy provide us with your product broucher.

Please advise by return e-mail if you can supply us with the below items, and if so, please advise best price and delivery time.Our Ref Description Qtty (cm)7000/1 Cobalt -Iron Alloy strip: Co 45% , Fe 42%, Ni 5. 75%, V 6.75% Hardness 600+/- 20 HV, Thickness, 0.5 mm , Width, 100 mm 5007000/1 Tungsten Base high density metal round bar class 2, Per ASTM A777-99, Diameter: 22 mm , Length: 1000 mm 3007000/1 Permanent magnet material , Alnico8 or Alnico9 round bar, hardness: 700+/- 20 HV , Diameter 16 mm , Length 500mm 1,0008000/1 Iron nickel alloy UNS k94100 (nilo 42) , strip, per ASTM F30-02 , cold rolled condition T: 0.35mm, W 100 mm 1,8008000/2 Iron nickel alloy UNS k94600 (nilo 46) , strip, per ASTM F30-02 , cold rolled condition T: 0.15 mm, W 100 mm 1,6008000/3 Iron nickel alloy UNS k94800 (nilo 48), strip, per ASTM F30-02, cold rolled condition T: 0.35mm, W 100 mm 2,0009000/1 Iron- nickel- cobalt wire alloy UNS K 94610 (kovar) per ASTM F15-98,Temper B (1/4 hard) D: 0.5 mm drawing wire 2,0009000/2 Iron- nickel- cobalt wire alloy UNS K 94610 (kovar) per ASTM F15-98,Temper B (1/4 hard) D: 2mm drawing wire 2,0009000/3 Cobalt alloy corrosion and heat resistant round wire UNS R30003 (Elgiloy) perAMS 5833B , solution heat treated and cold drawn condition D : 3mm 2,000

We require copper powder to manufacture carbon brushes.Please send sample and price.

For my research work I need pins of Silicon nitride and h-Boron nitride composite. The size of pin is Dia. 8-9mm and length is 25mm. The quantity will be about 100 nos. Can you provide the same?

Please consider a possibility of delivery the following production:Please consider a possibility of delivery the following production:Bottoms Elliptic:Mark of a material: S355J2+N Heat treatment after rolling is not required.Tolerances on EN 28013.The certificate — 3.1 EN 10204.- Du external — 760 mm (82 pieces).- Du external — 1500 mm (14 pieces).Thickness in both positions — 10 mm.This buyer also showed great interest in your Product Company Description Details, Delivery Time, FOB Price, Initial Order Quantity, Product Specifications, Product Complete Models,

We used copper and copper alloy poweder 9 mt per month. so plese give best price and send specifiactio with specific gravity. Cu10Pb10Sn ,Cu23Pb3Sn and Cu24Pb1Sn.