We are in need of Valve Grinding Machine. • Motor HP:1/3 • Source: 220v/50Hz • Cutting angle 300,450,600 • Valve range diam. mm:-26-32 • Appropriate grinding discs and cutters

We are in need of Double Acting Cylinder Group . • Pressing capacity. Rod in, ton:- 87-90 Rod out ton, :- 103-105 • Pressure (rod out & rod in), p.s.i:- 10,000 • Cylinder diameter, mm:-169- 165 • Overall length, mm :-470-472 • Stroke, mm:- 180-185 • Accessories:- Male & Female coupler assembly, Dust cap, Plugs, Hoses , adapters &others

We are in need of Electric Hydraulic Pump. • Power source, v:-220/380 • Line frequency, Hz:-50 • Reservoir capacity, Lit:-7.5 • Motor power, HP:-1-1.5 • Control valve:-3 Position, 4 way manual • Motor operating control:- Switch mounted on the pump or by remote switch • Accessories :- Gauges, bushings, Hose assemblies-185cm & 350cm, tow each & others

We are in need of Electrical Lifting Bridge• Lifting capacity, ton :- 14 - 15 • Lifting height, mm :- 1700 - 2000 • Width b/n the column, mm:- 2300 - 2700 • Overall length mm:- 5500 - 6000 • Lifting time (laden) Sec:- 23 - 24 • Lowering time (laden ) sec:- 13-14 • Motor horse power:- 3.5 - 4 • Power source, v:- 220/380/50HZ/three phase • Safety device :- Mechanical and electrical safety device shall be equipped • Type:- It shall be used for safe servicing of small , as well as large 4WD vehicles • Accessories :- A Jacking beam that shall provide a “wheel force” for most types of under vehicles work, and all other necessary tools to be included.

We now work to manufacture the interiors of new model of Mini-bus, need to import some needed accessories for it as the attached phots,Plastic Clip. Please check and let me know if you can supply us or not.

We now work to manufacture the interiors of new model of Mini-bus, need to import some needed accessories for it as the attached phots,Return Spring. Please check and let me know if you can supply us or not.

We are in need of Electrical and Mechanical Driven Overhead Crane. • Maximum lifting capacity ton:-8-10 • Lifting speed m/min :-1.5 • Maximum lifting height mm:- 1000-1500 • Motor power, hp:-2-2.5 • Power source, V:-220, 380/50HZ, 3ph • With all attachments and running gears and drives

We are in need of Heavy Duty Lathe Machine. • Turn diameter gap, mm : 900 • Center diameter , mm: 900 • Power source ; 220/380v/Ac, three phase, 50Hz • Number of speed :- min18 • Spindle bore, mm:- minimum 100 • Spindle speed range rpm:-40-2000 • Thread pitch :- to be stated • Swing over bed, mm ;- Min 450 • Swing over carriage, mm:-min 280 • Distance between centers, mm:-min.2000 • Hole through spindle ;- to be stated • Spindle nose thread:- to be stated • Tool on top slide:- to be stated • Travel of cross slid, mm:- min155 • Taper of tail stalk spindle :- to be stated • Protector graduations:- to be stated • Hand wheel graduations:- to be stated • Length over all:- to be stated • Width overall :- to be stated • Motor /speed control:- to be stated • Feeds/ revolution :- to be stated • Motor capacity, hp :- min.5 • Tail stock type and size:- to be stated

We are in need of Hydraulic Power Hack Saw Machine. • Capacity of round metal, mm:- 250 - 300 • Stroke, mm:-Max.145 • Stroke per min.:-85-90 • Electric motor , Hp:-1.5 - 2 • Speed, RPM:-1440-1450 • Blade size, mm:-508 x 38 • Number of cylinder, Pc:- 1 • Capacity of square bar, mm :-200-250 • Power Source, v:- 220/380, 50hz, three phase AC • Accessories to include:- • Auto stop panel • Limit contactor • Push button switch • Cut area pre – set adjustment gauge and others

We are in need of Hose Crimping Machine. • Head Chuck o Operation:- Manual o Maximum hose diameter, mm:-76-80 o Minimum diameter of hose, mm:-6 • Chuck jaw & length o Segment :- 8 o Length, mm :- 100 • Die punch & length o Sets:- 9 o Length mm:- 60-65 • Crimp die size, inch:-1/4, 3/8, 1/2, 5/8, 3/4, 1, 1 ¼,1 ½, 2 & others • Crimping depth, seating with micrometer • Crimping force, bar:- 600 • Control panel:- Electro Hydraulic • Power Source, v :- 220/380, 50Hz, Ac, 3 – phase • Hydraulic valve, type:- solenoid controlled valve,220v • Hydraulic pump, type:-High pressure plunger pump • Hydraulic Cylinder :- Single acting • Oil tank capacity, lit. :-25 - 30