We need a product that attached you can find the drawing, the picture of 3D model and manufacturing process of that. If your company is able to produce such a product pls inform us. The inner side of this product is coated with a fabric named “Dacron” and the outside is made from silicone rubber that below you can find the specifications of that. We have no sample to offer there is only 3d model.The quantity we need is 100 and each product is about 2.77 meters.Also we need to know if your engineering department works with 3d modeling softwares or not?if yes pls give me your e-mail so I can send you the 3D model files to you too.Here are the material specifications that we need:Unaged:Hardness: 60 ± 5 Min Tensile: 1100 psi Min Elongation: 400%After oven aging( 22 hours at 100°C (212°F))Max Hardness change: +10Max Tensile change: -35PLS kindly reply us asap.

We were informed that you have the Volvo System do detect anomalies in Volvo machines (VOLVO VCADS). Can you please confirm us if this is correct?If so, please inform us on the following points:1- The product has the interface matris (for detecting anomalies, at what time anomalies happenned, reparing instructions included...), cables and instalation CD?2- the version works with on series G of the wheel loaders?3- it comes in portuguese?Best Regards

I know about your product Bosch injector control valve F00RJ02235 min.10pc sample fright with express for india new delhi.

I need crown pinion rear 10/43 41201-80493 R please tell me about price

This is Thu from Phuc Dat.Our company has been in the gifts andpremiums market in VietNam for 9 years. I write to you to request that yousupply products of your incorporation to my company. I'm looking forHEX BOLT Thread L 100mm 40Cr x Designation of Screw Thread M29 x 2.5 L220 mm 10.9OIL SEAL 50 - 65 - 8Waiting for your prompt reply.Best regards

Buy Auto plastic fastener clip Toyota clips fasteners，Can you please send me samples of this clips

I WANT YOUR BEST PRICE FOR THIS ITEM 3028447 I NEED 100 PCS

Buy Wire Cable with J1962 16p Female to 12V Male 5.5mm DC Plug，How much would the subject cables cost?What would be the lead time?

We have need for some FLR2X-A wire for a prototype build. Can you provide a minimum buy (or 100 meter) quote for: 2.0mm grey 2.0mm black/dark green stripe0.5mm dark blue0.35mm dark blue/violet stripe0.35mm dark blue/white stripe0.35mm black/dark green stripe0.35mm brown/red stripe0.35mm black with yellow stripe

I'm looking for a very small two-part rivet for a product being developed. I have drawings in various formats when I hear back from you.